PMP 150 E Pump

PMP 150 E Pump
PMP 150 E Pump: The PMP-150E diaphragm pump is a packing free pump designed with special balls and seats to pump abrasive water-based coatings such as procelain enamel.

Compression ratio 1/1
Fluid volume per cycle (cm3) 100
Number of cycles per litre of products 10
Air consumption (m3/h) at 30 cycles/mn at 4 bar 1.1
Fluid Output at 30 cycles/mn (l/mn) 3
Free flow rate (L/mn) 19
Maximum air inlet pressure (bar) 6
Maximum fluid pressure (bar) 6
Maximum Fluid Temperature (°C) 50
Sound level (dBA) <70
Weight (kg) - bare pump 5
Diaphragm material Polyurethane
Wetted parts Polypropylene, PTFE, polyurethane
Height (cm) 22
Width (cm) 20
Depth (cm) 15

  Contact us for further enquiries


  Click the Kremlin Rexson  logo for further information


© Copyright Epac NZ Ltd - Site map Phone: 09 820 5481 Auckland New Zealand

Website Builder NZ
Website World